Polarized Series Wire Harness with 4.0mm Castle Connectors - Double up on power!
The
Polarized Series Wire Harness allows you to connect two battery packs
in series, combining the voltage of your batteries. For example: two 3S
(11.1v) packs will have the output voltage of 6S (22.2v) when connected
with this harness.
This harness is factory-fitted with 4.0mm
Polarized Castle Connectors. You will need a matching polarized male
connector soldered to your ESC and matching polarized female connectors
soldered to your batteries.
Castle Connector features:- Side ridges on the housing to make them easier to grip
- Marked for “Battery” and “ESC” for easy reference
Technical Specs:- Connector Size: 4.0 mm
- Wire gauge: 13AWG
- Connector to connector wire length: 127 mm
- Overall length: 162 mm
- Weight: 26.5 g
Note:
Always ensure that your ESC and motor are capable of handling the
combined voltage of both batteries. You must always use identically
prepared packs with this harness. Both packs must be fully charged and
properly balanced. Both packs must be by the same manufacturer, have the
same C ratings, and both must have the same capacity and level of
charge at all times. Failure to observe this warning will result in
damage to your batteries and/or ESC. Castle Creations is not responsible
for any damage as a result of misuse of this product.
FI / Finland
Lisää toivelistalle
